seaHorse-DP Version 2017
The seaHorse is the world's first HighTech WebLock with the best PreTension-Ability, made from a single piece of aluminum and has a versatile HollowCenterDiverter. This WebLock also impresses with its low weight and, at the same time, the generous dimensioning, which allows comfortable handling (even with up to 8mm thick slackline webbing).
Best PreTension-Ability Weblock with Double-Pin - seaHorse 1.5
The seaHorse is the most sophisticated weblock on the market. The new design adds versatility, new functions, and a low weight. The seaHorse is forged from a single piece of aircraft aluminium, which allows it to be really strong and lightweight.
The biggest innovation is the hollow center diverter. The hollow center diverter allows a variety of soft connections. This can be really useful when building a HangOver pulley system, attaching a regular pulley system, or attaching a rope to train for highlines in the park. We even built in some grooves that keep your soft attachments in place instead of sliding up. Note: the hollow center diverter cannot be used to anchor the seahorse.
The geometry of the seaHorse is optimised for the most efficient pretensioning possible. A lot of testing with a big modular plate has led to the perfect dimensions for a HangOver pulley system. To see how to create the lightest 15:1 system on the market, you can watch the video above!
The seaHorse comes in two versions. One with a single ball locking pin, and this version with two ball locking pins. This version is perfect for installing a softRelease directly into your seaHorse. Both versions come with a sewn end-loop for a direct shackle connection.
The two pins are connected with a rubber connection cord which is less likely to get entangled around the pins while tensioning the line.
The snout of the new seaHorse has been shortened to make it nicer and easier to climb over the seaHorse e.g. on a waterline
For high and super low tensioned slacklines mirco-slippage and misalignment is no longer an issue with the anti-slippage knot (see manual V3, only by super slippery webbings the mirco-slippage will be not fully stopped but decreased in an acceptable amount that no misalignment is possible). We spend a lot of efforts in R&D to get a no-slippage weblock and we are still surprised how efficient and simple the solution with the anti-slippage knot is.
- Working Load Limit (WLL) 12kN, MBS:60kN
- Designed for slacklines of 25-27mm in witdh (20mm with spacers)
- ball locking pin (d=11.1mm, weight optimized) out of high alloy, stainless steel (17-4PH)
- made from aircraft aluminium 7075-T6 in SLACKTIVITY-Green
- hot forged from one piece
- 36mm HollowCenterDiverter (HCD) works like a riggingplate!
- Weight: 266g